EP 135 x 4Ply Heat Resistant conveyor belt

_Heat Resistant conveyor belts and features

Type

Color

Temperature range of materials

Belt surface temperature range

Features

Applications

Low-Medium Temperatures

2011

Black

Lumpy materials 70～200℃

Powdery materials 70～150℃

60 ～ 120℃

Heat hardening type

Suitable for low-medium temperature materials which are abrasive

Coke, sintered products, etc.

High Temperatures

Super 50

Black

100 ～ 400℃

60 ～ 200℃

Heat softening type

Almost non-crack
cover
Suitable for powdery materials

Suitable for high temperature materials which are medium abrasive

Sintered ore products, cement clinker, hot powdery materials, etc.

Super 100

Black

100 ～ 400℃

60 ～ 200℃

Excellent wear
resistant cover
under high
temperature
Suitable for lumpy
materials

Suitable for high temperature materials which are very abrasive

Cokes, sintered ore products, etc.

Standard specifications

Carcass	：	Steel cord, Nylon, Polyester, Vinylon
Tensile strength	：	100～6,000N/mm
Belt width	：	300～3,200 mm
Length	：	Steel cord belts 50m and over, fabric belts 10m and over
Cover rubber	：	Heatbelt 2011, Super 50, Super 100

Selecting the right heat-resistant belt

1	The surface temperature of the belt varies with the type and size of the material being carried. With large lumps (e.g. sintered ores, coke) which allow air to circulate, the belt surface would be cooler than the lumps.

2	In the case of powdery or similar materials, such as cements, alumina, carbon black, etc., there is almost no temperature differential between material and belt surface. Therefore, in selecting a belt, it is necessary to know not only the temperature of the material to be　carried, but also to have an accurate idea of the surface temperature the belt will be operating at. Some examples of such temperatures are shown in the following table.

Material and Temperature of Belt Surface

Location	Material being carried	Size (mm)	Material temperature (℃)	Conveyor length (m)	Belt surface temperature at head pulley area (℃)	Recommended belt
Gas plant	Coke	100 ～ 200	70 ～ 100	80	50 ～ 60	2110
Ironworks	Sintered materials	10 ～ 150	70 ～ 300	15	70 ～ 115	2110, Super 100
Chemical plant	Carbide	80 ～ 150	160 ～ 190	40	90 ～ 110	2110, Super 100
Ironworks	Sintered materials	10 ～ 150	210 ～ 225	10	130	Super 100
Ironworks	Sintered materials	20 ～ 300	*200 ～ 400	6	130 ～ 150	Super 100
Cement works	Cements	powder	100 ～ 125	10	80 ～ 90	Super 50, Super 90
Chemical plant	Burnt lime	powder	130 ～ 150	17	100 ～ 130	Super 50, Super 90
Cement works	Clinker	10 ～ 30	100 ～ 220	70	100 ～ 110	Super 50, Super 90
Metal refinery	Metal powder	powder	170	17	120 ～ 130	Super 50, Super 90
Cement works	Cement materials	～ 30	180 ～ 220	9	100 ～ 120	Super 50, Super 90
Ironworks	Return of sinter	～ 10	250	18	150 ～ 190	Super 50, Super 90
Foundry	Casting sand	～ 2	280	27	100 ～ 200	Super 50, Super 90

* An asterisk indicates water-cooling system