Rubber belt vacuum filter
The rubber belt vacuum filter is a high-efficiency filtration and solid-liquid separation equipment independently developed by our company on the basis of the introduction of foreign technology of similar products.
Rubber filter belt is also called rubber drainage belt (vacuum belt), it is key part of vacuum belt filter(HVBF or VBF). The Carcass material of belt is PE/EE, which has excellent qualities like high strength, anti-acid/alkali/petrol/low and high temperature, and the most outstanding feature is low elongation rate under specified load, this can make sure the fabric is not easy to deform.
Description:
Rubber filter belt is also called rubber drainage belt(vacuum belt), it is key part of vacuum belt filter (HVBF or VBF). The Carcass material of belt is EP/EE, which has excellent qualities like high strength, anti-acid/alkali/petrol/low and high temperature, and the most outstanding feature is low elongation rate under specified load, this can make sure the fabric is not easy to deform.
According to different working conditions, rubber cover material can use different formulas then to meet different needs. Belt shaping and vulcanization are done in a single operation without the need for an additional splicing step, significantly enhancing belt straightness performance stability.
Grooves are cutted or molded into top cover of Rubber belt vacuum filter, and in the specific middle, there will be drainage holes. When working with vacuum pump, filtrate can go to vacuum box through these holes. The drainage hole part is fabric-free, so that corrosive liquid will not contact fabric to cause delamination, this will prolong the service of a rubber filter belt.
It is the critical part of filter belt and vacuum belt stock washer. There are many grooves with holes punched through on the surface of top cover, this allows for effective liquid drainage.
Rubber curb uses composite structure, which means waveform curb is bonded to the parallel rubber belt. This kind of structure makes the curb more flexible, can reduce damage on the roller while changing direction and can prevent the leaking of slurry. Maintenance is easy.
Characteristics:
1. Cover Rubber classification: General, chemical-resistant, etc.
2. we can produce filter belt within width 3400mm.
3. we can produce filter belt to your request,which includes carveing the grooves.4. we can make sidewall which matches the filter belt.
Our rubber belt greatly reduce the opportunity of deformation. Rubber cover material can be specially formulated to meet specific needs of operating conditions. Belt shaping and vulcanization are done in a single operation without an additional splicing step, which significantly enhancing belt straightness performance stability. We have the most excellent and largest rubber belt production line in China, even in Asia. We own 1 set of 6000×7000mm(the widest in the world) and 1 set ofl 3500×6000mm flat vulcanizer machine and 1 set of 3000×2500mm splicing vulcanizer machine.