Fire Resistant corrugated sidewall belt

Fire Resistant corrugated sidewall belt generally is used with corrugated wall conveyor together, and also used with general belt conveyor. It is suitable for the horizontal, short distance condition.The angle will be not less than 30 degrees.

Sidewall-Conveyor-Belts — cleats-Conveyor-Belts

Characteristics:
A. Materials can be conveyed at a large slope up to 90 degrees.
B. The belt has large loading capacity and the materials cannot be scattered.
C. The slope of conveying can be changed from horizontal to sloping,or from sloping to horizontal.
D. The conveyor is simple in structure,flexible in arrangement and occupying only a small area.

Feature of sidewall industrial rubber belt
Corrugated Sidewall industrial rubber Belt is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space requirement, no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be designed into a set of complete transportation system according to application.Din Standard Apron/Sidewall Rubber Conveyor Belt.

Sidewall Range

Our sidewalls represent the latest in design ideas and manufacturing techniques. The sidewall design ensures maximum flexing without fatigue, the profile has excellent vertical stability for load retention and return side support. The design allows for high compression to ensure smooth inner deflection around small radii. Another important design feature is that the sidewalls can be pressed form both sides when being applied to the base belt, this offers much higher bond strengths and security. The fabric insertion is of the diagonal type which gives excellent tear resistance and also allows the sidewall to flex more easily. The rubber compounds used have been tested to ensure maximum flexibility along with high abrasion resistant and high tensile strength and provide additional resistances where needed.

Type	H (mm)	BW (mm)	TW (mm)	P (mm)	Weight (kg/m)	Min Pulley \ Din(mm)
S	40	30	20	25	0.45	125
	60	50	45	40	1.38	160
	80	50	45	40	1.70	200
	100	50	45	40	2.00	250
	120	50	45	40	2.65	315
MDSF	120	75	65	63.5	3.20	315
	160	75	65	63.5	4.20	400
	200	75	65	63.5	5.02	500
	240	75	65	63.5	7.50	630
	250	75	65	63.5	7.80	630
	280	75	65	63.5	8.70	800
	300	75	65	63.5	9.40	800
HHDF	300	100	90	83	10.10	800
	400	100	90	83	14.80	1000
	500	105	95	89	19.10	1250

Our sidewalls type 120mm and higher have special diagonal fabric reinforcement in the corrugations as standard, but smaller sidewalls can have this feature where required.

The above pulley diameter is limited to ordinary grade and standard coating rubber thickness. When the special grade of coating rubber and strength are different, a larger pulley diameter may be required. Please consult for specific specifications.

Cleat Range

The design of the cleat guarantees its best performance. C-type and TC-type cleat design can provide the maximum conveying capacity and have good self-cleaning performance. The production of the cleats adopts the molding process, and the specially developed rubber materials produce the cleats with large stiffness and strong impact resistance, and they are not easy to deform even if the cleats carry higher density materials. The unique rubber formula of the cleat is designed to be stiff, and it also enhances the impact resistance of the cleat, thereby preventing the cleat from deforming due to long-term stress.

When the conveying angle is less than 40 degrees, the cleat is generally T type; when the conveying angle is greater than 40 degrees, the cleat is generally C type, TC type or TCS type. The fine adjustment of the cleat distance needs to consider the correspondence with the sidewall wave crest, and the side bolt fastening device matched with different types of cleats can prevent materials from leaking from the gap between the cleats and unloading to cause accumulation of dead ends.

Cleat Type	Height(mm)	Base Width (mm)	Weight (Kg/m)	Min Pulley Dia(mm)
C	55	100	1.45	125
	75	100	2.00	150
	90	110	2.81	250
	110	110	3.27	315
T	55	100	1.61	125
	75	100	2.20	150
	90	110	2.70	250
	110	110	3.23	315
	140	160	5.49	400
	180	160	6.67	500
	230	160	8.60	630
TC	55	75	1.13	125
	75	100	1.82	150
	90	110	3.22	250
	110	110	3.94	315
	140	150	5.49	400
	180	150	6.81	500
	230	160	8.68	630
	280	180	14.90	800
TCS	230	160	13.80	630
	280	160	15.30	800
	360	230	22.80	1000
	470	230	30.80	1250

Our cleats form 110mm and higher have special diagonal fabric reinforcement in the vertical and angled parts, but smaller cleats can have this feature when required.