Rough top impression Conveyor Belt

Rough top impression Conveyor Belt is mainly used in the agriculture field or light-duty application.We can provide top surface is impression and the bottom surface can be impressive as well or rubber cover or bareback.

A belt cover with a textured pattern impressed can be made on either the top cover or both covers depending on the customer’s requirement. Suitable for material carried in the agricultural field or on light duty application.

RUBBER CONVEYOR BELTS CONSTRUCTION

Rough top impression Conveyor Belt - GRADES & STANDARDS

Standard & Grade	Minimum Tensile Strength (Mpa)	Minimum Elongation at Break (%)	Maximum Abrasion Loss (mm³)
DIN – X	25	450	120
AS-M	24	450	125
I S -M24	24	450	150
BS – M24	24	450	150
SANS – M	24	450	120
SANS – N	20	400	150
DIN – Y	20	400	150
AS – N	17	400	200
IS – N17	17	400	200
BS – N17	17	400	150
RMA 1	17	450	150
JIS – S	18	450	200

RUBBER CONVEYOR BELTS CONSTRUCTION

Cover Rubber	Covers of natural or synthetic rubber are used in Conveyor Belt production to save base Carcass from wear, impact, deterioration and other influences. They are compounded to meet particular service conditions as Bras ion, Oil, Heat, Flame, Chemical Resistant and Antistatic, Etc. cover type, quality and thickness are matched to service life of belt involved.Cover formulation for Belt manufacturing is determined by material to be carried and environment in which belt will operate.
Carcass	This consists one or more plies of textile fabric with rubber on each side to give adhesion and flexibility. Commonly used fabrics are, Nylon, Polyester and Cotton. Strength to move loaded belt and absorb the impact of impinging material being loaded into Conveyor Belt.
Rubber Skim Coat	Extra layer compound between plies is called Skim Coat. These are contributors to Internal Adhesions, Impact Resistance and play a significant role in determining belt load support and trough ability. Improper Skims can adversely affect belt performance and lead to ply separation.
Breaker Fabric	A special woven fabric between cover and carcass improves cushioning, the gouging and tear resistant properties of cover rubber and protects Carcass from Impact damages. This construction is recommended for use in belts handling primarily crushed and sized material which gives severe impact to belt when lumps drop at a loading point.