Nylon mesh conveyor belt with breaker are used for transporting unsorted raw materials, in extreme operating conditions, having a high resistance to impact.

The outer shell is made from polyamide/polyester (EP), polyester/polyester (EE), polyamide/polyamide (PP).

Conveyor belts with textile insertion and breaker can be used in an environment with temperatures between -25 and +70°C. The material from the breaker can be used as protection layer, aimed to increase the resistance at temperature, ripping, striking or strengthening the layers, in order to increase the hardness of the edges.

For the first application – increasing the resistance of the belt’s edges – steel cables are used with increased resistance to stretching, BF 125 HR as reinforcement. For the second application – increasing the hardness of the belt’s edges – cables of regular steel are used, BF 125 HR as reinforcement. Both types can use FLEXIMAT breakers, in variants with textile or steel reinforcement. One or two layers can be applied above and below the resistance support.

The rubber layers are manufactured according to DIN 22102/1-91 or according to customer’s specifications.

Stand By & Replacement nylon mesh conveyor belt cement & Clinker Section.

– Normal Belt with Rubber Grade- DIN Y (Abrasion maximum 150 mm3) and

– Heat Resistance ( HR Grade temperature From 180’C to 200’C.

Application for example belt data: 
Belt width BB=1200 mm
EP500/3 5+1.5mm covers to Grade DIN Y
Feed distance =2126 mm
Discharge distance = 600 mm
Height of material = 225 mm
Material cross section = 15,75 dm2
Measuring section a= 300mm
Rubber skirt edge: applied
Including Switching / Target Plate
in between belt vulcanizing joint
for Speed monitor sensor with
dimension 75 mm X 20 mm X 1.5 mm
having 60mm distance from the Belt edge,
Material: Simple Tin/metal strip.
Mention the Location / or mark the Switching plate on the belt.