AS-M conveyor belt use in Mining & Construction industries
Product overview
AS-M conveyor belt, the grade M cover rubber is the most widely used in the Mining & Construction industries. Tried and proven over many years, it has proven to be cost effective and durable. Grade M is a general purpose compound with a higher degree of cut and gouge resistance used to convey large abrasive lumps such as quartz, limestone, coke etc. Grade M complies with Australian Standard AS1332-2000 and is suitable for handling burden to 50°C.
STANDARD SIZES AVAILABLE
• Widths to 2800mm (up to 3200mm on special manufacture)
• Ply Strength from PN100 to PN500 (single & multiple ply available)
• Roll lengths up to 500m (depending upon construction)
• Specials can be made upon request
TYPICAL APPLICATION
• Iron ore handling & processing
• Coal handling & processing
• Steel plants
• Mineral processing plants
• Quarries
• Hard rock mining
• Heavy duty applications
TECHNICAL INFORMATION
RUBBER PROPERTIES | TYPICAL RESULTS | AS1332 SPECIFICATIONS FOR AS-M |
Abrasion Resistance (maximum mm3) | 115 | 125 |
Tensile Strength(minimum MPa) | 26 | 24 |
Elongation (minimum %) | 500 | 450 |