EP 800/5 , 2+2 BELT CONVEYOR EXPORT TO DAMMAN
EP 800/5 , 2+2 Bucket elevator belt export to Dammam Port. EP150 with hole for the Bucket elevator belting. Detailed specification and technical data sheet fot reference. Please see the left navigation.
1. How to Select the Suitable Belt for Bucket Elevator Belting
Bucket elevator belt uses belt as its traction, there are pitches between buckets, normally ,the buckets will be fixed with belt by bolts. General used belts include: ordinary rubber belt, nylon rubber belt and steel cord rubber belt. Here PK Machinery will introduce how to select the suitable rubber belt :
Ordinary rubber belt adopts cotton as its core, then molded after being coated with rubber vulcanization,. Usually, the ordinary rubber belt is used for Bucket elevator beltwith small lifting height.
2. BELT SPLICE
The Maxi-Splice is a mechanical clamping device with a simple three-piece construction. The patented design is for use on PVC and rubber belting. It accommodates belts of all thicknesses. Standard splice bolts will accommodate up to ½” thick belting. Longer bolts are available for thicker belts. Each splice set accommodates two inches of belt width. It is tested and approved by leading manufacturers of PVC and rubber belting.
Bucket elevator belt drawing
EP 800/5 , 2+2
Belt Width 700mm
Total Thickness 10mm
Fabric of Plies 5ply
Elongation at Break % Min 400
Quality Industrial Bucket elevator belt, manufactured to DIN 22102.
Standard belts include –
• EP 250/2 2+1
• EP 315/2 3+1.5
• EP 315/3 3+1.5
• EP 400/3 4+2
• EP 500/3 3+1.
• EP 500/3 5+1.5
• EP 630/4 5+1.5
• EP 640/4 6+2
• EP 800/5 6+2