Bucket Elevator Conveyor Belt with Steel Cord in Cement Plant
The steel bucket elevator Belt is a rubber elevator belt with a special steel cord core. The cords provide low elongation with high elasticity in the length, and cross rigidity in the width. The built-in elasticity allows running over slightly crowned pulleys which greatly improves belt tracking, and helps to avoid belt wandering which is often the reason for elevators shutting down. The rigid weft cords act as a barrier to ripping and tearing which increases the holding ability for the bucket bolts. This produces a good cross rigid belt resulting in excellent straight tracking characteristics.
In contrast, most conventional steel cable belts lack elasticity and consequently have to run over truly flat, cylindrical pulleys which increases the risk of belts off-tracking.
The Monster bucket elevator belts is designed for heavy duty/industrial bucket elevator applications with long centre distances that require stable running and reliable belts with high safety factors. All Monster bucket elevator beltss are manufactured in accordance with DIN 22102 and ISO norms.
Elevator conveyor belt is composed of rubber belt and elevator bucket, which need a belt with
high strength and low elongation in service. The Bucket Elevator Conveyor Belt is applicable to
transport vertically loose powdery materials of usually not more than 50mm in diameter, such as
crushed limestone, sand, gravel, cement, grain etc.