chevron conveyor belt pattern for sand mine
The chevron conveyor belt pattern can be widely used in large quantities to transport materials such as cement clinker,lime,domestic or industrial waste,grains,graindepots and bagged items. Monster Belting’s Chevron / Cleated Conveyor Belts breakthroughs in heat tolerance, abrasion resistance and splice adhesion properties have been industry-proven throughout the world in cement plants,lime kilns, potash, foundries, coke oven plants, iron ore pelletizing, steel plants and others.
Chevron (Profiled) Conveyor Belts with following production standards,
International Standards
- RMA Grade I, II
- DIN-X, Y, W, Z, X
- AS-A, M, M+, N, F
- JIS-H, S, L, A, G, P, D
- BS/IS-M24, N17
Cover Rubber Tensile | 8MPA,10MPA,12MPA,15MPA, 18MPA,20MPA,24MPA,26MPA | |||
Belt width/length | 400-2200mm,18-96inch | 10-500m | ||
Top/Bottom cover thickness | 2+2, 3+1.5, 4+2, 4+1.5, 4+3, 5+1.5,etc | |||
Belt thickness | 3mm,4mm,5mm,6mm,7mm,8mm,9mm, 10mm,12mm,15mm,20mm,25mm | |||
Tensile strength options | EP315/3,EP400/3,EP500/3,EP600/3,EP400/4,EP500/4,EP600/4 EP500/5,EP1000/5,EP1250/5,EP600/6,EP1200/6 | |||
Belt edge | Mound edge or cut edge |
Heat resistant 150 degree, 180 degree rubber conveyor belt/band
Chevron conveyor belt pattern fabric Transport 1200mm Conveyor Belt EP300 Rubber Conveyor Belt For Heavy Rock
AS1332-2000 | ||||||
Grade | TensileStrength(MPA) | Elongation at Breaking | Abrasion (≤mm3)
| Adhesive srength betweePlies(N/mm) | Adhesive srength betweeAdhesive srength betwee | |
Bottom Cover (0.8-1.9mm) | Top Cover (≥1.9mm)
| |||||
A | 17 | 400 | 70 | ≥6 | ≥4 | ≥ 4.8 |
E | 14 | 300 | / | |||
F | 14 | 300 | / | |||
M | 24 | 450 | 125 | |||
N | 17 | 400 | 200 | |||
S | 14 | 300 | 250 | |||
S* | 12 | 300 | 250 |
BS-490 | ||||||
Grade | TensileStrength(MPA) | Elongation at Breaking | Abrasion (≤mm3)
| Adhesive srength betweePlies(N/mm) | Adhesive srength betwee Adhesive srength betwee | |
Bottom Cover (0.8-1.9mm) | Top Cover (≥1.9mm)
| |||||
M | 24 | 450 | / | ≥5.25 | ≥3.5 | ≥ 4.5 |
N | 17 | 400 | / |
DIN-22102 | ||||||
Grade | TensileStrength(MPA) | Elongation at Breaking | Abrasion (≤mm3)
| Adhesive srength betweePlies(N/mm) | Adhesive srength betwee Adhesive srength betwee | |
Bottom Cover (0.8-1.9mm) | Top Cover (≥1.9mm)
| |||||
A | 18 | 400 | 90 | ≥7 | ≥5 | |
X | 25 | 450 | 120 | |||
M | 24 | 450 | 150 | |||
N | 20 | 400 | 250 |