Hot vulcanized joint core adhesive

Conveyor belt repair core adhesive

In the repair of conveyor belt joints, the conveyor belt repair core adhesive is also referred to as the rubber pad in the heat vulcanizing joint of the conveyor belt. During the construction process, the vulcanized core compound is placed in the middle part of the belt, and then vulcanized by the vulcanizing machine. The vulcanizing machine can be evenly distributed in the belt body during the vulcanization process, with strong adhesive force and ensuring the quality of the joint part. It is widely used in the PVG/ PVC solid woven conveyor belt, fabric conveyor belt, steel cord conveyor belt, etc. Heat vulcanizing repair of conveyor belt joints.

Characteristics of non vulcanized core adhesive:

good viscosity, strong adhesion, good elasticity, long storage life, and stable performance of non vulcanized core adhesive.

Application of non vulcanized core adhesive: conveyor belt vulcanized joint

Thickness of non vulcanized core adhesive:

1mm2mm3mm4mm5mmWidth of non vulcanized core adhesive: 500mm, 10kg/ volume

Non vulcanized core adhesive storage:

the proper storage temperature of the vulcanized core is below 30 degrees, and it is protected from light, heat, pressure, moisture and rain.

The main components of the hot vulcanization joint of conveyer belt include three major factors

Conveyor belt thermal vulcanization joint adhesive, as the name implies, is used for conveyor belt thermal vulcanization joint processing related adhesive. Generally speaking, it mainly includes conveyor belt thermal vulcanization joint core rubber, conveyor belt thermal vulcanization joint surface rubber and conveyor belt thermal vulcanization joint mortar. The three parts cooperate with each other to finish the hot vulcanizing joint treatment of the belt under the action of the hot vulcanizing machine.

1. conveyor belt hot vulcanizing joint core adhesive, also known as conveyor belt hot vulcanizing rubber pad. When the hot vulcanized joint is treated, it is used to be laid in the middle of the fabric core layer or filled in the upper and lower parts of the wire rope core of the belt to enhance the impact resistance of the joint after the belt joint and increase the bonding strength of the joint.

2. conveyor belt hot vulcanized joint surface adhesive, also known as the belt hot vulcanizing cover. When the hot vulcanized joint is treated, it is used to lay on the joint of the conveyor belt to ensure the integrity of the whole belt after the joint, and to enhance the tensile and wear resistance of the conveyor belt.

3. Conveyor belt hot vulcanized joint mortar, mainly used for the adhesive treatment between conveyor belt, core rubber and surface adhesive, adhesive performance of the mortar, directly related to the adhesive durability after the belt joint. Relatively speaking, the bonding durability of the belt joints bonded with high quality adhesive is stronger, and the joint parts are less likely to be degummed.

After understanding what the conveyor belt thermal vulcanization joint adhesive is, then look at the belt thermal vulcanization joint adhesive selection.

Generally speaking, the construction personnel in the belt thermal vulcanization joint glue selection, as far as possible to choose with the belt itself material closer to the joint material is appropriate. That is to say, if the construction conveyor belt is made of neoprene rubber, the construction personnel should try to choose neoprene rubber for the best bonding.

Of course, in order to facilitate the choice of construction personnel, came into being a lot of general-purpose joint glue, joint treatment under various materials can be used, no need to judge the material of various conveyor belts.