Recycle belt conveyor

Name of the Item : Recycle Belt Conveyor

Service : Conveyoring  of Recycle Dap (Di-Ammonium Phosphate Fertilizer) intermediate product in the form of dust, Lump, oversize & undersize crushed/ pulverized etc.

Conveying Material receiving location : From eight different rectangular & circular ducts

Conveying Material Temp : 100°C ± 10C°

Belt Core : Rubber

belt Speed : 0.80 m/sec.

Belt Size : 1200 mm width × 12 mm Thick

Thickness of Rubber Layer : a) Top Cover Thickness: 4.50 mm

1. b) Bottom Cover Thickness: 1.50 mm
2. c) Side and coating: 8-10 mm

Recycle belt conveyor Layer/Ply : 5 Ply.

Edge : 10 mm without fly of Both edge same Thickness Smooth and well finished also same rubber of Conveyor Belt.

Fabric : Nylon/Vinylon (warp/welf)

Tensile Strength : 650 kg f/cm total thickness.

Adhesion Strength (Top cover to carcass) : 2.8 kg f/cm width (Min^m)

Adhesion Strength (Bottom cover to carcass) : 2.8 kg f/cm width (Min^m)

Adhesion Strength (ply to Ply) : 3.2 kg f/cm width (Min^m)

Weight : 14-15 kg/m. Min^m

Carrying Capacity : a) Normal: 150 Ton/hr.

1. b) Max^m220M Ton/hr.

Feeding Type : Chute

Bulk Density : 900-1100 kg/m³

Location : In – door, Dusty, Humidity

Operation : Continuous Operation

Material Characteristic : Acidic

Resistant : Heat, Abrasion, Acid, Cracking.

Tension Type : Take-up by counterweight.

Angle of Repose : 30-36°

Endless Jointing at site (to be done by Owner) : Hot Vulcanization.

Item No. 02

Name of Item : Ex-dryer belt conveyor.

Services   : Conveying Ex-dryer Material (Dap Fertilizer)

Conveying Material Temp. : 80 °C- 100 °C

Temp. Withstand Capability : 200 °C

Belt Cover : Rubber (Heat Resistant Rubber).

Belt Speed : 48.0 Meter/Min.

Belt Size : 1200 mm width × 12 mm Thick

Thickness of Rubber Layer : a) Top Cover Thickness: 4.50 mm

1. b) Bottom Cover Thickness: 1.50 mm
2. c) Side and coating: 8-10 mm

Layer/Ply : 5 Ply.

Edge : 10 mm without fly of Both edge same Thickness Smooth and well finished also same rubber of Conveyor Belt.

Fabric : Polyester/ Nylon/ Vinylon (Warp/Weft)

Tensile Strength : 650 kg f/cm total thickness.

Adhesion Strength (Top cover to carcass) : 2.8 kg f/cm width (Min^m)

Adhesion Strength (Bottom cover to carcass) : 2.8 kg f/cm width (Min^m)

Adhesion Strength (ply to Ply) : 3.2 kg f/cm width (Min^m)

Weight : 18 kg/m. Min^m

Carrying Capacity : a) Normal: 160 MT/hr.

1. b) Max^m200M Ton/hr.

Feeding Type : Chute

Bulk Density : 900-1100 kg/m³

Operation : Continuous Operation

Location : In – door, Dusty, Humidity

Material Characteristic : Acidic

Resistant : Heat, Abrasion, Acid, Cracking.

Tension Type : Screw Take-up

Angle of Repose : 28°-30°

Endless Jointing at site (to be done by Owner) : Hot Vulcanizing.