Sliding Conveyor Belts
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the base and the belt. Therefore developed special sliding conveyor belts where friction is decreased to a minimum.
With regard to the intended use there are two types of conveyor belts available:
EP type – troughable
EMF type – cross-stable (non-troughable) flat conveying
Sliding conveyor belts are suitable for:
timber industry and sawmills
recycling, garbage and mineral processing plants
packaging industry
airports
parcel terminals and cardboard plants
food industry
Sliding belts FABRIC TYPE (N/mm) EP250 / 3
WIDTH 500 650 800 1300 Other constructions and widths on request.