Superspot belt repair vulcanizer
Conveyor belt vulcanizing press is the widest used conveyor belting equipment, its only need a few steps to confirm press model.
The proper model selection for a sectional vulcanizier depends on determining dimensions A and B(see diagram above)
A— the platen length(A) is calculated by adding to the belt manufacturer’s recommended splice length.
6 inches(150mm) for fabrics belt
14 inches(355mm) for steelcord belt
B- the platen width(B) which includes the bias angle, it determined by adding to the belt width
6 inches(150mm) for fabric belt
8 inched(200mm) for steelcord belt
To this figure multiply by:
1.07 for 22 degree bias angle
1.05 for 17 degree bias angle
Dimensions A and B represent the outside platen dimensions. Scan down the list below until you arrive at a platen size the corresponds with your figures.
If the size you require is not listed below our Sales department will be happy to recommend a suitable size, rectangular configurations and multiple platen arrangements are also available upon request.
Super spotter belt repair vulcanizer Package
Our factory
Experieced Experts
We specialize in conveyor belt vulcanizing press and its relative parts since 2001, and have rich experience in manufacture.
One-stop Shopping
All products related to conveyor belt vulcanizer can be provided, including vulcanizing press, aluminum alloy cross beam, pressure bag, heating plate, electronic pump, inside quick cooling device, super spotter, control box.
Quality Assurance
Strict quality control team ensures we deliver high quality products to our customers.
Quick Response
7*24 online, customers will get reply within 24 hours.