Super width EP conveyor belt with bare back
Product Description
When the belt is wider than 1800mm, we call it super width belt. Monster has 2400mm and 6500mm wide vulcanizing machines, which can make belts from 1800-5500mm. Thickness can be from 12-42mm.
The surface is smooth due to good quality of equipment and good production process. Customers can customize different belts based on different special requirements.
The belt maximum width is 6.8 meters with cut edge. And the belt carcass is 2-4plies with oil resistant. The thickness can be 4 mm lower.
The Super width EP conveyor belt with bare back outer surface of the top or bottom of the fabric of a bareback belt has neither an elastomeric compound cover nor is it impregnated with an elastomeric compound. A Super width EP conveyor belt with bare back is with back fabric surface provides a low coefficient of friction. A slider bed package conveyor with the bareback surface down against the slider bed or the bareback surface up in connection with a diverter bar are examples of bareback surface applications.
Cover Properties of the belts:
| Cover Grade | Tensile Strength ≥ | Elongation ≥ | Abrasion ≥ | Change Rate of tensile strength and elongation after aging % | |
| Mpa | kgf/cm2 | ||||
| Heavy(H) | 18 | 180 | 400 | 0.7 | -25 to 25 |
| Medium(M) | 14 | 140 | 350 | 0.8 | -25 to 25 |
| Light(L) | 10 | 100 | 300 | 1 | -30 to 30 |
Adhesion and elongation of the belt:
| Belt Carcass | Adhesive Strength | Elongation | |||
| Between plies N/MM | Between rubber and carcass | Longitudinal elongation at break% ≥ | Longitudinal elongation at load% ≤ | ||
| Rubber thickness≤1.5mm | Rubber Thickness>1.5mm | ||||
| Cotton Canvas | ≥4.05 | ≥3.15 | ≥3.50 | 10 | 2 |
Delivery time: 30-60 days
Quality control: Quality is controlled by technical and inspection teams under different standards.
Package: packing according to different requirements
Rubber cover features: different formulas will be applied to make different rubber covers to fit special working conditions.