It must be connected in a endless for practical use, so the belt joint is a very important part of the preparation. Nylon conveyor belt is suitable for conveying non-corrosive bulk, granular, powder materials, such as coal, coke, sand, cement and other bulk materials (materials) or finished articles at room temperature, conveying bulk density of 6.5 ~ 2.5 t / M3 of various bulk, granular, powder and other loose materials, can also be used for conveying adult articles. The quality of the joint directly affects the length of use of the conveyor belt and the smooth operation of the conveyor.

1. Method of connection

Conveyor Belt joint methods are: Mechanical Joints, BELT JOINTING SOLUTIONS – COLD VULCANIZING CEMENT, hot vulcanization joints and other commonly used methods.

Mechanical joint generally refers to the use of belt buckle joint, this joint method is convenient, fast and more economical , but the joint efficiency is low, easy to damage, on the conveyor belt Product lifetime has a certain impact . In the Polyvinyl chloride and Pvg whole-core flame-retardant anti-static conveyor belt joints, the general level 8 products below the use of this joint method.

Cold belt joint, that is, using a cold adhesive to carry out the joint. Nylon conveyor belt has the characteristics of thin body, high strength, impact resistance, good trough forming, strong adhesive force between layers, excellent flexibility and long service life. It is suitable for medium and long distance, high load capacity and high speed Widely used in mines, coal yards, chemical industry, metallurgy, construction, ports and other departments. This kind of joint method is more efficient than mechanical joint, and also more economical. It should have better joint effect. However, from practice, it is difficult to master the technological conditions In addition, the quality of the adhesive on the impact of the joint is very large, so not very stable.

It has been proved by practice that the heat vulcanized joint is the most ideal joint method, which can ensure high joint efficiency At the same time, it is also very stable, the joint life is also very long, easy to grasp.

2. Joints for layered conveyor belts

Mechanical joints, cold-bonded joints and hot-vulcanized joints can be used as needed. General cold bonding joints, hot

vulcanization joints to take the step-type structure joints.

Conveyor Belt Jointing Guide method:

Cut The rubber belt into a ladder (one step for each layer of canvas) . The width of the ladder is usually equal to 150 mm, as shown. Nylon conveyor belt has the characteristics of thin body, high strength, impact resistance, good trough forming, strong adhesive force between layers, excellent flexibility and long service life. It is suitable for medium and long distance, high load capacity and high speed Widely used in mines, coal yards, chemical industry, metallurgy, construction, ports and other departments. The peeling surface shall be flat and the canvas layer shall not be damaged. However, the burrs are coated with a raw glue for lap joint. Glue the top and bottom seams with a Bonding.

The standard Conveyor Belt Hot Vulcanizing Joint used for all types of conveyor belts excepting 2 to 8 ply. The splicing team and the splice area need to protect from the elements and electrical power is required for the vulcanizing press. The joint must be protect from the dust and condemnation during the making of splice for the guarantee to good result.

With a long and proven record in repair and maintenance of Rubber Conveyor Belt of various types, We offers International class services to its customers. Our services ensure:

• Minimize down time
• Enhance belt life
• Reduced cost
• Increased productivity & profitability

We have experienced technical team with world Class tools and tackles, we are specialist in Belt laying, Belts Jointing, Belt Repairing (Nylon and Steel Cord Belts) and Pulley Drum Rubber Lagging by Hot and Cold Process.

Conveyor belt repair cement cold vulcanizing solution belt rip cold bonding. The Rubber Conveyor Belt is widely demanded for various industrial applications. We have experienced technical team with world Class tools and tackles, we are specialist in Rubber Belt Repair.

We offer Vulcanizing Conveyor Belts Repairing with knowledge of world class technology, highly trained manpower and support of our principals help us enjoy the status of being the BEST in the service industry.

Monster Belting has a team of highly trained technicians. Our strength lies in the knowledge, skills, world class technology from our principal and our infrastructure. We ensure Conveyor Belt Repair services providing as a international standards and complete satisfaction for the customers.

We,  at monster belting , undertake repair services for a various kinds of jobs in Conveyor Pulley Lagging.  We have many kinds of Diamond Shaped Pulley Lagging Rubber Sheet, Pulley Lagging for Belt Conveyor Drum.

Conveyor Belt Joint is the strongest and most reliable method of joining a belt and should be used wherever possible, it is nearly as strong as the belt itself is less troublesome than other fastening methods and results in longer belt life. The surface is left smooth so that scrapers and brushes can be used more effectively and with less risk of damage to the belt than with a fastener joint.

We can make Side Wall Conveyor Belt Jointing Services in hot and cold process like sidewall reconditioning, repairing & Bucket refixing.

A wide variety of Conveyor Belt Fasteners are available and it would be impossible to cover all types. The plate fasteners installation is described to cover all types. User will be possibly be familiar with other types and information is generally supplied by the relevant fasteners.